Saving configuration to Megadrum for my midi vibes

Discussions of any related software

Moderator: Related software moderators

Re: Saving configuration to Megadrum for my midi vibes

Postby kevin251 » Sun Jun 20, 2021 11:12 am

airflamesred wrote:
kevin251 wrote: I couldn't find any info about the velocity curve x/y (2) axes - any pointers, please?

Just drag the nodes on the graph and tweek away. Personally I found it more intuitive to adjust the vst to suit but either is possible.
As far as vibraphone VSTs, the acknowledged king is from ://www.soniccouture.com/en/products/26-percussion/g46-vibraphone/
Works in the free version of Kontakt.

https://m.youtube.com/watch?v=6-00yZ9posE

Cheers, Mark (love the vid!). Yep, Soniccouture is on my list - I'm hoping to find an iPad solution but the only thing I've found so far is a couple of goodish options in the GarageBand Keyboard Collection but if push comes to shove, I will sort out setup with my Mac with one of the VSTs (OrangeTree do another good one, and there's a freebie called Vibromaster which I may use whilst in config/tweak mode. Also a lot depends on the extent to which I will get back to playing live.

Thanks again.
kevin251
 
Posts: 26
Joined: Thu Nov 26, 2020 12:53 am

Re: Saving configuration to Megadrum for my midi vibes

Postby airflamesred » Sun Jun 20, 2021 1:48 pm

Thanks Kevin,
The Orange tree one does need full Kontakt, which I would recommend if you are looking at other types of sound and makes it more expensive. I didn't see much option with Mallet choice either - anyway choices, choices.
Are you planning on a pedal or two?
How is it triggering anyway, the vid was showing some large latency but I guess that's the sync with the video.

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1200
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Saving configuration to Megadrum for my midi vibes

Postby dmitri » Sun Jun 20, 2021 4:18 pm

kevin251 wrote:
dmitri wrote:Yes, https://www.megadrum.info/content/megad ... figuration (https://www.megadrum.info/content/pads-settings is linked from there) is the documentation for all MegaDrum settings.

Thanks - I couldn't find any info about the velocity curve x/y (2) axes - any pointers, please?

See CustomCurve in https://www.megadrum.info/content/misce ... s-settings
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Saving configuration to Megadrum for my midi vibes

Postby kevin251 » Mon Jun 21, 2021 9:19 am

dmitri wrote:
kevin251 wrote:
dmitri wrote:Yes, https://www.megadrum.info/content/megad ... figuration (https://www.megadrum.info/content/pads-settings is linked from there) is the documentation for all MegaDrum settings.

Thanks - I couldn't find any info about the velocity curve x/y (2) axes - any pointers, please?

See CustomCurve in https://www.megadrum.info/content/misce ... s-settings

Thanks, Dmitri - didn't scroll far enough!
kevin251
 
Posts: 26
Joined: Thu Nov 26, 2020 12:53 am

Re: Saving configuration to Megadrum for my midi vibes

Postby kevin251 » Mon Jun 21, 2021 9:29 am

airflamesred wrote:Thanks Kevin,
The Orange tree one does need full Kontakt, which I would recommend if you are looking at other types of sound and makes it more expensive. I didn't see much option with Mallet choice either - anyway choices, choices.
Are you planning on a pedal or two?
How is it triggering anyway, the vid was showing some large latency but I guess that's the sync with the video.

Cheers Mark - Soniccouture it will probably be then!!!
  • It's triggering with one piezo under each bar.
  • That original video was first connection with no tweaking etc - it's better now but yep, probably a bit of sync issue with the the video - I'll provide an updated video soon.
  • I'm not too concerned about latency at the moment until I sort out the sound source - I'm just using my work PC to play with the settings - if I can't sort an iPad solution, I will run something in isolation on my less cluttered Mac.
  • Rather than USB, I also intend trying a midi cable which could drive the sounds on my Casio PX5S or Roland XV2020 - this method would (I think) allow pedals a bit easier.
kevin251
 
Posts: 26
Joined: Thu Nov 26, 2020 12:53 am

Re: Saving configuration to Megadrum for my midi vibes

Postby kevin251 » Mon Jun 21, 2021 3:06 pm

@Mark, @Dmitri
New quick video added to the Google photos album here - connected to iPad/GarageBand - latency not bad IMHO, if you're interested. More tweaks to come!
kevin251
 
Posts: 26
Joined: Thu Nov 26, 2020 12:53 am

Re: Saving configuration to Megadrum for my midi vibes

Postby ibanman555 » Wed Jun 23, 2021 10:57 pm

This is great!! Nice work, I've been thinking about doing the same, either to use up my remaining inputs or to use a whole other MegaDrum....
ibanman555
 
Posts: 276
Joined: Sat Jan 28, 2012 8:44 pm
Location: Upstate New York (Adirondacks)

Re: Saving configuration to Megadrum for my midi vibes

Postby kevin251 » Fri Jun 25, 2021 1:38 pm

ibanman555 wrote:This is great!! Nice work, I've been thinking about doing the same, either to use up my remaining inputs or to use a whole other MegaDrum....
Cheers Scott(?)
kevin251
 
Posts: 26
Joined: Thu Nov 26, 2020 12:53 am

Re: Saving configuration to Megadrum for my midi vibes

Postby airflamesred » Fri Jun 25, 2021 5:05 pm

Looks great Kevin, what genre as a matter of interest?

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1200
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Saving configuration to Megadrum for my midi vibes

Postby kevin251 » Wed Jun 30, 2021 4:10 pm

airflamesred wrote:Looks great Kevin, what genre as a matter of interest?
@Mark Soul jazz, jazz funk, acid jazz............ from Bobby Hutcherson to Roy Ayers and all that, well, jazz! :D
kevin251
 
Posts: 26
Joined: Thu Nov 26, 2020 12:53 am

PreviousNext

Return to Related Software

Who is online

Users browsing this forum: No registered users and 29 guests

cron